Home > High Bay & Low Bay Options >

Batten Occupancy movement Sensor LED or Fluorescent
LED Batten Sensor
LED Batten type PIR Sensor


 
Alternative Views:


Price Inc VAT: £14.99


Availability: Usually Ships in 24 Hours
Product Code: MC032S
Qty:

Features What is it? Instalation Instructions
 
LED Batten Microwave Sensor


Automatic switching based on motion and light level. Zero-crossing point operation helps protect the sensor against in-rush current.
Super Compact size makes it suitable to fix within most luminaires.

3-pole press-in terminal (L, N, L'), easy assembly. Detection area, time delay and daylight threshold can be precisely set via DIP switch.
Wide detection area, range up to 12m in diameter. Replace PIR sensor for flood light directly.

MC032S is an innovative and active motion detector with HF system 5.8GHz. Motion can be detected through plastic, glass and thin non-metal materials.

The sensor supplies a simple energy-saving solution to use light only when and where you need it. It automatically switches on/off light based on motion and ambient light level. Can control all kinds of lamps, for example, halogen, fluorescent and LED lights. Compact size and small casing, suitable to fix within most luminaires. 3-pole press-in terminal (L, N, L'), very easy to install.

The high quality relay is particularly suitable for commercial use with switching power up to 400W for LEDs and fluorescent lamps and up to 800W for incandescent lamps.

Automatic switching based on motion and light level. Zero-crossing point operation helps protect the sensor against in-rush current.
Super Compact size makes it suitable to fix within most luminaires.

3-pole press-in terminal (L, N, L'), easy assembly. Detection area, time delay and daylight threshold can be precisely set via DIP switch.
Wide detection area, range up to 12m in diameter. Replace PIR sensor for flood light directly.

MC032S is an innovative and active motion detector with HF system 5.8GHz. Motion can be detected through plastic, glass and thin non-metal materials.

The sensor supplies a simple energy-saving solution to use light only when and where you need it. It automatically switches on/off light based on motion and ambient light level. Can control all kinds of lamps, for example, halogen, fluorescent and LED lights. Compact size and small casing, suitable to fix within most luminaires. 3-pole press-in terminal (L, N, L'), very easy to install.

The high quality relay is particularly suitable for commercial use with switching power up to 400W for LEDs and fluorescent lamps and up to 800W for incandescent lamps.

O
perating voltage Rated load

HF system Transmitting power Power consumption Detection zone Detection sensitivity Hold time

Daylight sensor Mounting height Motion detection Detection angle

Operating temperature IP rating

220~240Vac, 50Hz 400W(inductive), 800W (resistive)

5.8GHz±75MHz, ISM wave band <0.5mW

0.5W(standby)
Max.(D x H): 16m x 6m
10% / 25% / 50% / 75% / 100%

5s / 30s / 90s / 3min / 20min / 30min 2lux / 10lux / 25lux / 50lux / Disable 6m Max.

0.5~3m/s
150°(wall installation)

360°(ceiling installation) -35°C~70°C

IP65





Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

High Bay & Low Bay Options
Battens
Battens / PIR's / Emergency Bulk Head