Home > High Bay / Low Bay Options / Sensors >

LED High Bay 200w UFO Light 0>10v Dim 7 Year Warranty Lumileds & Meanwell Driver
LED High Bay 200w light Lamp X/L IP55
LED High Bay Light 200W

Alternative Views:

We will not be beaten on price for same spec
Price: £99.98 Exc VAT

Availability: Usually Ships in 24 Hours
Product Code: HB-LED-UFO-200W

Features What is it? Instalation Instructions
LED High Bay Light 200W with Lumileds LED & 0>10v Dim Meanwell Driver IP65

Key Facts:
  • Lumileds LED's are the best on the market
  • Now with 7 Years UK Warranty
  • 0>10v Dimmable Meanwell Driver, the best driver maker in the world bar none (Always randomly check bar code numbers with Meanwell Europe, we buy direct from Meanwell so are 100% confident in our product)
  • Cold Forged Heat Sink dissipation coefficient to 226, Die casting (Big far apart fins) is cheaper but only scores 70 see lower down this page for more explanation on this
  • 120 Degree beam angle LENs which is the expensive bit that most leave out, finished with Polycarbonate cover which is food safe (No Glass)
  • Supplied with 3m Flex with IP65 quick connector
  • This high spec is not available anywhere else in the UK at a better price and that is a guarantee
Item Code HB-LED-UFO-200W
Power 200W
Input Voltage AC100-240V
Frequency 50Hz-60Hz
Total Harmonic <10%
Power Factor 0.98
Lamp Efficiency 94%
Working Voltage DC30-38v
LED Qty. 224LEDs
LED Brand Lumileds LED 3030
LED Initial Lumens 31000Lm
Output Lumens 28500Lm
Driver Brand Meanwell Dimmable HGB driver
Color Temperature DW 6000K
CRI 80Ra
Beam Angle 120
IP Rating IP65
Working Temp. . -40c > 50c
Weight 4.8kgs
Warranty Whole lamp 7 YEARS

More driver info here:

Die-casting V Cold Forging

“What is the difference?”

Die-Casting (Pressure casting) shape

The die-casting shape mainly made from ADC12 aluminium, this type of is aluminium material is made from waste and Second-hand Aluminium.

So, the die-casting shape ratio is max. 85%, the heat dissipation is not good.

The life after 2>3years the lamps light loss ratio is very high, it will be several times higher than the Cold–forging shape.

So, die-casting shape can be a low price mainly because the material cost is much lower BUT the heat dissipation is much lower than the cold forging option.

Cold Forging shape

The cold Forging shape use AL1060 Aluminium which is about 99.6% efficient. The AL1060 is brand new aluminium the efficiency ratio is very high, obviously pure aluminium cost is higher.

Manufacturing in this way means our shape can have many fins which helps the heat dissipate.

The long and short of it is much less heat on the LED’s and driver giving a far great length of life and light degradation when compared to the cheap Die-Cast method.

In the long run its cheaper to buy quality at a great price. You will not find a product of our quality at a lower price anywhere in the UK and that’s a promise.

Simon Throw

Managing Director

01536 644035

Click below for up to the minute feedback:

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

High Bay / Low Bay Options / Sensors