Home > High Bay & Low Bay Options >

LED UFO Low Bay / High Bay Philips Light 120W with Meanwell Driver and Philips LED
LED High Bay 120w light Lamp X/L IP55
LED High Bay Light 120W


 
Alternative Views:


We will not be beaten on price for same spec
Price Inc VAT: £139.98


Availability: Usually Ships in 24 Hours
Product Code: HB-LED-UFO-120W
Qty:

Features What is it? Instalation Instructions
 
LED UFO High Bay Light 120W with Meanwell Driver and Philips LED
Features

Key Facts:
  • Philips LED's are the best on the market
  • Meanwell Driver the best driver maker in the world bar none (Always randomly check bar code numbers with Meanwell Europe, we buy direct from Meanwell so are 100% confident in our product)
  • Cold Forged Heat Sink dissipation coefficient to 226, Die casting (Big far apart fins) is cheaper but only scores 70 see lower down this page for more explanation on this
  • 120 Degree beam angle LENs which is the expensive bit that most leave out, finished with Polycarbonate cover which is food safe (No Glass)
  • Supplied with 3m Flex with IP65 quick connector
  • This high spec is not available anywhere else in the UK at a better price and that is a guarantee



Die-casting V Cold Forging

“What is the difference?”


Die-Casting (Pressure casting) shape



The die-casting shape mainly made from ADC12 aluminium, this type of is aluminium material is made from waste and Second-head Aluminium.

So, the die-casting shape ratio is max. 85%, the heat dissipation is not good.

The life after 2>3years the lamps light loss ratio is very high, it will be several times higher than the Cold–forging shape.

So, die-casting shape can be a low price mainly because the material cost is much lower BUT the heat dissipation is much lower than the cold forging option.

Cold Forging shape


The cold Forging shape use AL1060 Aluminium which is about 99.6% efficient. The AL1060 is brand new aluminium the efficiency ratio is very high, obviously pure aluminium cost is higher.

Manufacturing in this way means our shape can have many fins which helps the heat dissipate.

The long and short of it is much less heat on the LED’s and driver giving a far great length of life and light degradation when compared to the cheap Die-Cast method.

In the long run its cheaper to buy quality at a great price. You will not find a product of our quality at a lower price anywhere in the UK and that’s a promise.

Simon Throw

Managing Director

01536 644035



Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

High Bay & Low Bay Options